Application Patrol; Anti-Virus - ZyXEL Communications ZyWALL USG 100 Series User Manual

• Leave the Access field set to Allow and the Log field set to No.
The ZyWALL checks the firewall rules in order. Make sure each rule is in the
correct place in the sequence.

5.4.13 Application Patrol

Use application patrol to control which individuals can use which services through the
ZyWALL (and when they can do so). You can also specify allowed amounts of bandwidth and
priorities. You must subscribe to use application patrol. You can subscribe using the Licensing
> Registration screens or one of the wizards.
MENU ITEM(S)
PREREQUISITES
Example: Suppose you want to allow vice president Bob to use BitTorrent and block
everyone else from using it.
1 Create a user account for Bob (User/Group).
2 Click AppPatrol > Peer to Peer to go to the application patrol configuration screen.
Click the BitTorrent application patrol entry's Edit icon.
• Set the default policy's access to Drop.
• Add another policy.
• Select the user account that you created for Bob.
• You can leave the source, destination and log settings at the default.
With this example, Bob would have to log in using his account. If you do not
want him to have to log in, you might create an exception policy with Bob's
computer IP address as the source.

5.4.14 Anti-Virus

Use anti-virus to detect and take action on viruses. You must subscribe to use anti-virus. You
can subscribe using the Licensing > Registration screens or one of the wizards.
MENU ITEM(S)
PREREQUISITES
ZyWALL USG 100/200 Series User's Guide
AppPatrol
Registration, zones, Schedules, users, user groups, addresses (source,
destination), address groups (source, destination). These are only used as
criteria in exceptions and conditions.
Anti-X > AV
Registration, zones
Chapter 5 Configuration Basics
121