Chapter 3 Web Configurator
Table 6 Navigation Panel Summary (continued)
LINK
TAB
Dial-in Mgmt.
Vantage
CNM
Language
Maintenance
File Manager Configuration File Use this screen to manage and upload configuration files for the ZyWALL.
Firmware
Package
Shell Script
Log
View Log
Log Setting
Report
Traffic Statistics
Session Monitor
Anti-Virus
IDP
Content Filter
Anti-Spam
Email Daily
Report
Diagnostics
Reboot
3.3.3 Main Window
The main window shows the screen you select in the menu. It is discussed in the rest of this
document.
Right after you log in, the Status screen is displayed. See
information about the Status screen.
3.3.4 Message Bar
Check the message bar when you click Apply or OK to verify that the configuration has been
updated.
Figure 13 Message Bar
74
FUNCTION
Use this screen to configure settings for an out of band management
connection through a modem connected to the DIAL BACKUPAUX port.
Use this screen to configure and allow your ZyWALL to be managed by the
Vantage CNM server.
Use this screen to select the language of the ZyWALL's web configurator
screens.
Use this screen to look at the current firmware version and to upload
firmware.
Use this screen to manage and run shell script files for the ZyWALL.
Use this screen to look at log entries.
Use this screen to configure the system log, e-mail logs, and remote syslog
servers.
Use this screen to collect traffic information and display basic reports about it.
Use this screen to display the status of all current sessions.
Use this screen to collect and display statistics on the viruses that the
ZyWALL has detected.
Use this screen to collect and display statistics on the intrusions that the
ZyWALL has detected.
Use this screen to start or stop data collection and view spam statistics.
Use this screen to configure where and how to send daily reports and what
reports to send.
Use this screen to have the ZyWALL collect diagnostic information.
Use this screen to restart the ZyWALL.
Chapter 7 on page 175
ZyWALL USG 100/200 Series User's Guide
for more