Connections For A Cut Editing System - Sony DSR-DR1000 Operating Instructions Manual

Connections for a Cut Editing System

The following figure shows a cut editing system
configuration that includes this unit and a DSR-1500A/
1500AP unit to serve as the player and recorder.
For details of connecting devices other than this unit, refer
to the instruction manual for each device.
When you select assemble or insert editing mode on the editing
control unit, the two DSR-1500A/1500AP units (recorder and
player) will automatically enter the selected editing mode.
Composite
video input
Source monitor
1
SUPER
REMOTE IN(R)
This unit
(player)
2
Audio input
3
MONITOR
SDI OUT 2
1
1
REF.
VIDEO IN
PLAYER
Editing control unit (RM-450/450CE,
a)
PVE-500, etc.)
Notes
• This application requires both of the DSR-1500A/
1500AP units (recorder and player) to be fitted with the
optional DSBK-1501 board.
• The DSR-1500A/1500AP units shown in the following
figure are fitted with the optional DSBK-1501 and
DSBK-1504/1504P boards.
A75 Ω coaxial cable (not supplied)
B 9-pin remote control cable
(not supplied)
CCable with RCA phono plugs
(not supplied)
Composite
video input
Main monitor
1
VIDEO
OUT B-Y/CPST
(SUPER)
SDI IN
VIDEO OUT
Y/CPST
REMOTE
2
RECORDER
a)For the settings on the editing control unit, see
"Settings on an editing control unit" on page 93.
Audio input
3
MONITOR
DSR-1500A/1500AP
(recorder)
Connections for a Cut Editing System
85