Sony DSR-DR1000 Operating Instructions Manual page 68

OPERATIONAL FUNCTION [Operational]: Operation
settings
PREROLL TIME [> Preroll]:
Set the preroll time.
AFTER CUE-UP [> After CUE]: Select the operating mode
following cue-up.
PLAY START [> PLAY start]: Set the timing for switching from
stop mode to playback mode.
In an editing system including an editing control unit such as
the PVE-500, you can adjust this setting so that the delay
before switching to playback mode is the same on all the decks
of the editing system. It is then no longer necessary to
synchronize the decks for editing, and the preroll time can be
shortened.
a) F.FWD: PLAY button and NEXT button pressed at same time
REW: PLAY button and PREV button pressed at same time
b)
Speed
TYPE 2
FWD
+3
+1
(reverse)
RVS
-1
-3
RVS
DISPLAY CONTROL [Display]: Settings related to
indications on the monitor and the unit
CHARA. DISPLAY [> Chara disp]: Determine whether or not
to output text (such as time code values) from the SUPER
connector.
CHARA. POSITION [> Chara pos]: Set the position of text
superimposed on output from the SUPER connector to the
monitor.
CHARA. TYPE [> Chara type]: Set the type of characters in
text superimposed on output from the SUPER connector
to the monitor.
CHARA. VSIZE [> Chara size]: Determine the vertical size of
characters such as time code output from the SUPER
connector for superimposed display on the monitor.
68
Menu Contents
c)
TYPE 3
+3
Rotation rate
(reverse)
FWD RVS
RVS
Description of settings
15 SEC [>> 15 sec] to 0 SEC [>> 0 sec]: The preroll time can
be set in one-second increments to between 0 and 15
seconds.
A preroll time of at least 5 seconds is recommended when
using this unit for editing. When an editing control unit such as
the PVE-500 has been connected, this setting is disabled and
the setting on the editing control unit is in effect. Operations
such as the preroll time setting and the time data switching
operation are also performed on the editing control unit.
Factory default setting: 5 SEC [>> 5 sec]
*STOP [>> STOP]: Stop mode
STILL [>> STILL]: Output still pictures in search mode.
16 FRAME DELAY [>> 16 delay] to 4 FRAME DELAY [>> 4
delay]:
The larger the numerical value, the longer the delay.
Factory default setting: 5 FRAME DELAY [>> 5 delay] (for
DSR-DR1000) or 4 FRAME DELAY [>> 4 delay] (for DSR-
DR1000P)
Speed
FWD
Rotation rate
FWD
-3
Description of settings
OFF [>> OFF]: Do not output text. (In spite of this setting,
pressing the MENU button causes menu text to be
output.)
*ON [>> ON]: Output text.
Use the cursor/clip operation buttons in the menu control
section to adjust the text position while watching the monitor
screen.
To return to level 1 of the setup menu, press the MENU button.
Make the following settings while watching the monitor screen.
*WHITE (WITH BKGD) [>> White]: White characters on black
background
BLACK (WITH BKGD) [>> Black]: Black characters on white
background
WHITE/OUTLINE [>> W/outline]: White characters with black
outline
BLACK/OUTLINE [>> B/outline]: Black characters with white
outline
Make the selection while watching the monitor screen.
*X1 [>> X1]: Standard size
X2 [>> X2]: 2 times standard size