Displaying Enhanced Items; Changing The Settings Of Enhanced Items - Sony DSR-DR1000 Operating Instructions Manual

SETUP MENU
DISPLAY CONTROL
BRIGHTNESS :75%
100%
* 75%
50%
Monitor screen
7
Press the j or J (CUE) button to change the setting
of the item.
SETUP MENU
DISPLAY CONTROL
BRIGHTNESS :75%
100%
* 75%
50%
Monitor screen
8
To change other settings, press the K (IN) button to
return to the previous screen, then repeat steps 5 to 7
as required.
9
When you have completed the settings, press the SET
button.
The message "NOW SAVING..." appears on the
monitor screen, and "Saving..." appears in the time
counter display, while the new settings are saved in
memory.
When the saving operation is completed, the monitor
screen and time counter display return to their normal
indications.
Notes
• If you power off the unit before saving operation is
completed, settings may be lost. Wait until the
saving is completed before powering off the unit.
• If, instead of pressing the SET button, you press the
MENU button, the new settings are not saved. The
message "ABORT !" appears on the monitor screen
and "Abort !" in the time counter display for about
0.5 second, and the system exits the menus. To
change more than one setting, be sure to press the
SET button after making the settings.
>> 75%
Time counter display
>> 50%
Time counter display
Meanings of indications on the monitor
screen
On-screen indication
Right-pointing arrow (k) at
the right of a menu item
See step 1 of the foregoing
operating procedure.
Left-pointing arrow (K) at
the left of a menu item
See step 4 of the foregoing
operating procedure.
Character string at the right of
a menu item
An asterisk in a complete list
of settings
See step 6 of the foregoing
operating procedure.

Displaying Enhanced Items

The factory default setting is not to display enhanced
items.
To display enhanced items, set the MENU GRADE menu
item (see page 75) to ENHANCED, following the
procedure in the previous section "Changing the Settings
of Basic Items." (In step 3, first select "MENU GRADE,"
and next select "ENHANCED," then press the SET button
to save the setting in memory.)
With this done, when you press the MENU button and the
(OUT) button to display the setup menu, all basic and
k
enhanced items on menu level 1 appear.
Changing the Settings of Enhanced
Items
To change the settings of enhanced items, first carry out
the procedure in the previous section "Displaying
Enhanced Items," then proceed as follows.
Meaning
Pressing the k (OUT)
button switches to the next
lower menu level or to a
setting selection screen.
Pressing the K (IN) button
returns to the previous
(higher) menu level.
Current setting of the menu
item
When shown with a colon
(:):
the current setting is the
same as the factory
default setting.
See step 4 of the
foregoing operating
procedure.
When shown with a raised
dot (•):
the current setting is
different from the factory
default setting.
See step 2 of the
operating procedure in
"Changing the Settings
of Enhanced Items."
Factory default setting
Changing Menu Settings
79