Cueing Up A Desired Cue Point - Sony DSR-DR1000 Operating Instructions Manual

Cueing Up a Desired Cue Point

When you have started this unit, the cue pointer is
automatically positioned at the top of the disk (or the start
point of the first-recorded clip).
When you press the NEXT button with the J (CUE)
button held down, the cue pointer jumps to the first-
registered cue point. A second press of the NEXT button
Top of disk: The initial position of the cue pointer
when you have started the unit.
If cue points are registered as shown in the above figure,
pressing the NEXT button repeatedly with the J (CUE)
button held down makes the cue pointer jump in the order
ARBRCRD.
To jump back from point D to point B for example, press
the PREV button twice with the J (CUE) button held
down.
46
Playback
Clip 1
A D
with the J (CUE) button held down makes the cue pointer
jump to the second-registered cue point, a third press
makes the cue pointer to the third-registered cue point, and
so on.
When you press the PREV button with the J (CUE) button
held down, the cue pointer jumps to the previous cue point.
Clip 2
B C
A: First-registered cue point
B: Second-registered cue point
C: Third-registered cue point
D: Fourth-registered cue point
Clip 3