Changing Menu Settings; Buttons Used To Change Settings; Changing The Settings Of Basic Items - Sony DSR-DR1000 Operating Instructions Manual

VIDEO OUTPUT PHASE mode
The time code output signal is synchronized with the output
video signal.
This mode is appropriate when outputting signals from a
single device to a number of recorders using separate cables
for video, audio, and time code.
In this mode, the same time code is recorded on all of the
recorders 1 to n.
VIDEO OUT
AUDIO OUT
TIME CODE OUT
Output device
(VCR, camera, etc.)
• Composite video signal
• S-video signal
• Analog component signal
• SDI (video and audio) signal
Audio signal
Time code signal

Changing Menu Settings

This section explains how to change menu settings.

Buttons Used to Change Settings

VIDEO IN
Use the following buttons in the menu control section to
VIDEO OUT change the menu settings.
AUDIO IN
Menu control buttons
AUDIO OUT
MENU button
TIME CODE IN
TIME CODE OUT
DSR-DR1000/DR1000P
(1st unit)
J (CUE) and j buttons
VIDEO IN
VIDEO OUT
AUDIO IN
AUDIO OUT
TIME CODE IN
TIME CODE OUT
K (IN) and k (OUT)
DSR-DR1000/DR1000P
buttons
(2nd unit)
VIDEO IN
VIDEO OUT
AUDIO IN
RESET button
AUDIO OUT
TIME CODE IN
TIME CODE OUT
DSR-DR1000/DR1000P
SET button
(nth unit)
Changing the Settings of Basic
Items
The factory default setting is to display only the basic
items. To change the settings of basic items proceed as
follows.
Functions
• Opens the menu and
launches menu control
mode.
• Closes the menu and exits
menu control mode.
These buttons move the
highlighted cursor up and
down within the current level
to select an item or setting.
Hold down one of these
buttons to make the
highlighted cursor move
continuously.
• Press the k (IN) button
to go up one level.
• Press the K (OUT)
button to go down one
level.
Hold down one of these
buttons to make the
highlighted cursor move
continuously.
• Returns the setting to the
factory default setting.
• Sends a negative
response to prompts on
the monitor screen.
• Saves the new setting in
memory.
• Sends a positive response
to prompts on the monitor
screen.
Changing Menu Settings
77