Displaying And Maintaining Ipv6 Is-Is - 3Com Switch 4800G 24-Port Configuration Manual

Displaying and
Maintaining IPv6 IS-IS
To do...
Configure IPv6 IS-IS to
redistribute routes from
another routing protocol
Configure the filtering of
outgoing redistributed
routes
Enable route leaking
Specify the maximum
number of equal-cost load
balanced routes
n
The ipv6 filter-policy export command, usually used in combination with the
ipv6 import-route command, filters redistributed routes when advertising them
to other routers. If no protocol is specified, routes redistributed from all routing
protocols are filtered before advertisement. If a protocol is specified, only routes
redistributed from the routing protocol are filtered for advertisement.
To do...
Display brief IPv6 IS-IS
information
Display the status of the
debug switches
Display IS-IS enabled
interface information
Display IS-IS license
information
Display LSDB information
Display IS-IS mesh group
information
Display the mapping table
between the host name and
system ID
Display IS-IS neighbor
information
Display IPv6 IS-IS routing
information
Display SPF log information
Display the statistics of the
IS-IS process
Clear all IS-IS data structure
information

Displaying and Maintaining IPv6 IS-IS

Use command to...
ipv6 import-route protocol
[ process-id ] [ allow-ibgp ] [ cost
cost-value | [ level-1 | level-2 |
level-1-2 ] | route-policy
route-policy-name | tag tag-value ] *
ipv6 filter-policy { acl6-number |
ipv6-prefix ipv6-prefix-name |
route-policy route-policy-name } export
[ protocol [ process-id ] ]
ipv6 import-route isisv6 level-2 into
level-1 [ filter-policy { acl6-number |
ipv6-prefix ipv6-prefix-name |
route-policy route-policy-name } | tag
tag ]*
ipv6 maximum load-balancing
number
Use the command...
display isis brief
display isis debug-switches
process-id
display isis interface [ verbose ]
process-id
display isis license
display isis lsdb [ [ l1 | l2 | level-1 |
level-2 ] | [ [ lsp-id lsp-id | lsp-name
lspname | local ] | verbose ] * ] *
[ process-id ]
display isis mesh-group [ process-id ]
display isis name-table [ process-id ]
display isis peer [ verbose ]
[ process-id ]
display isis route ipv6 [ [ level-1 |
level-2 ] | verbose ] * [ process-id ]
display isis spf-log [ process-id ]
display isis statistics [ level-1 |
level-2 | level-1-2 ] [ process-id ]
reset isis all [ process-id ]
463
Remarks
Optional
Not configured by
default
Optional
Not configured by
default
Optional
Not enabled by
default
Optional
4 by default
Remarks
Available in any view
Available in any view
Available in any view
Available in any view
Available in any view
Available in any view
Available in any view
Available in any view
Available in any view
Available in any view
Available in any view
Available in user
view