3Com Switch 4800G 24-Port Configuration Manual page 873

To do...
Enter system view
Create a traffic behavior
and enter the
corresponding traffic
behavior view
Configure accounting
action
Configure TP action
Configure traffic filtering
behavior
Configure traffic mirroring
action
Configure nested VLAN tag
action
Configure traffic redirect
action
Remark the customer
network VLAN ID for
packets
Remark DSCP value for
packets
Remark 802.1p precedence
for packets
Remark drop precedence
for packets
Remark IP precedence for
packets
Remark local precedence
for packets
Remark the service provider
network VLAN ID for
packets
Configuration example
1 Network requirements
Create a traffic behavior named test, configuring TP action for it, with the CAR
being 640 kbps.
2 Configuration procedure
# Enter system view.
<Sysname> system-view
Use the command...
system-view
traffic behavior behavior-name
accounting
car cir committed-information-rate [ cbs
committed-burst-size [ ebs
excess-burst-size ] ] [ pir
peak-information-rate ] [ green action ]
[ red action ] [ yellow action ]
filter { deny | permit }
mirror-to { cpu | interface
interface-type interface-number }
nest top-most vlan-id vlan-id
redirect { cpu | interface interface-type
interface-number | link-aggregation
group agg-id | next-hop { ipv4-add
[ ipv4-add ] | ipv6-add [ interface-type
interface-number ] [ ipv6-add
[ interface-type interface-number ] ] } }
remark customer-vlan-id vlan-id-value
remark dscp dscp-value
remark dot1p 8021p
remark drop-precedence
drop-precedence-value
remark ip-precedence
ip-precedence-value
remark local-precedence
local-precedence
remark service-vlan-id vlan-id-value
Configuring a QoS Policy
Remarks
-
Required
behavior-name:
Behavior name. This
operation leads you to
traffic behavior view
Required
You can configure the
traffic behavior as
required.
873