70
Overview
Applying a QoS Policy
to VLANs
Configuration
Prerequisites
Configuration Procedure
A
PPLYING A
When applying a QoS policy to VLANs, go to these sections for information that
you are interested in:
"Overview" on page 889
■
"Applying a QoS Policy to VLANs" on page 889
■
"Displaying and Maintaining QoS Policies Applied to VLANs" on page 890
■
"Configuration Examples" on page 890
■
QoS polices support the following application modes:
Port-based application: QoS policies are effective for inbound packets on a
■
port.
VLAN-based application: QoS policies are effective for inbound traffic on a
■
VLAN.
A QoS policy is not effective on dynamic VLANs, for example, VLANs created by
GVRP.
The QoS policy to be applied is defined. Refer to "Configuring a QoS Policy" on
■
page 870 for policy defining.
VLANs where the QoS policy is to be applied are determined.
■
Follow these steps to apply a QoS policy to VLANs:
To do...
Enter system view
Apply the QoS policy to the
specified VLAN(s)
Note that, when you apply a QoS policy with the qos vlan-policy command, the
support for the inbound/outbound keyword varies with the actions defined in
the traffic behavior, as described in Table 70.
Q
S P
O
OLICY TO
Use the command...
system-view
qos vlan-policy policy-name vlan
vlan-id-list { inbound | outbound }
VLAN
S
Remarks
-
Required