3Com Switch 4800G 24-Port Configuration Manual page 43

Console Port Login Configuration with Authentication Mode Being Scheme
To do...
Configure the console port
Configure the command level available
to users logging in to the user interface
Define a shortcut key for starting
terminal sessions
Define a shortcut key for aborting tasks
Make terminal services available to the
user interface
Set the maximum number of lines the
screen can contain
Set history command buffer size
Use the command...
speed speed-value
parity { even | mark |
none | odd | space }
stopbits { 1 | 1.5 | 2 }
databits { 5 | 6 | 7 | 8 }
user privilege level
level
activation-key
character
escape-key { default |
character }
shell
screen-length
screen-length
history-command
max-size value
43
Remarks
Optional
The default baud rate of
the AUX port (also the
console port) is 9,600
bps.
Optional
By default, the check
mode of the console
port is set to none, that
is, no check bit.
Optional
The default stop bits of
the console port is 1.
Optional
The default data bits of
the console port is 8.
Optional
By default, commands of
level 3 are available to
users logging in to the
AUX user interface.
Optional
By default, pressing
Enter key starts the
terminal session.
Optional
The default shortcut key
combination for aborting
tasks is < Ctrl+C >.
Optional
By default, terminal
services are available in
all user interfaces.
Optional
By default, the screen
can contain up to 24
lines.
You can use the
screen-length 0
command to disable the
function to display
information in pages.
Optional
The default history
command buffer size is
10. That is, a history
command buffer can
store up to 10
commands by default.