3Com Switch 4800G 24-Port Configuration Manual page 36

36 C 2: L
HAPTER OGGING
I T C P
N HROUGH THE ONSOLE ORT
To do...
Configure Set the baud
the console rate
port
Set the check
mode
Set the stop
bits
Set the data
bits
Configure the command
level available to users
logging in to the user
interface
Define a shortcut key for
starting terminal sessions
Define a shortcut key for
aborting tasks
Make terminal services
available
Set the maximum number of
lines the screen can contain
Set the history command
buffer size
Set the timeout time for the
user interface
Use the command...
speed speed-value
parity { even | mark |
none | odd | space }
stopbits { 1 | 1.5 | 2 }
databits { 5 | 6 | 7 | 8 }
user privilege level level Optional
activation-key character Optional
escape-key { default |
character }
shell
screen-length
screen-length
history-command
max-size value
idle-timeout minutes
[ seconds ]
Remarks
Optional
The default baud rate of an AUX
port (also the console port) is 9,600
bps.
Optional
By default, the check mode of a
console port is set to none, that is,
no check bit.
Optional
The stop bits of a console port is 1.
Optional
The default data bits of a console
port is 8.
By default, commands of level 3 are
available to users logging in to the
AUX user interface.
By default, pressing Enter key starts
the terminal session.
Optional
The default shortcut key
combination for aborting tasks is <
Ctrl+C >.
Optional
By default, terminal services are
available in all user interfaces.
Optional
By default, the screen can contain
up to 24 lines.
You can use the screen-length 0
command to disable the function to
display information in pages.
Optional
The default history command
buffer size is 10. That is, a history
command buffer can store up to 10
commands by default.
Optional
The default timeout time of a user
interface is 10 minutes.
With the timeout time being 10
minutes, the connection to a user
interface is terminated if no
operation is performed in the user
interface within 10 minutes.
You can use the idle-timeout 0
command to disable the timeout
function.