Assigning Node Names And Ip Addresses For The C-Lans And Lsps - Avaya G700 Installing Manual

Installing a new G700 without an S8300 using the Gateway Installation Wizard
Note:
For information on installing the CLAN boards on the S8400, S8500, or
Note:
S8700-series port networks and complete information on installing an S8400,
S8500, or S8700-series Media Server, see the Installation documentation on the
Documentation for Avaya Communication Manager, Media Gateways and
Servers CD, 03-300151.

Assigning Node Names and IP Addresses for the C-LANs and LSPs

Note:
The CLAN boards must be TN799DP running version 5 or greater firmware. Be
Note:
sure to check the firmware version for these boards on the S8400, S8500, or
S8700-series Media Server. For information on how to upgrade the firmware,
please see "Upgrading firmware on programmable TN circuit packs," in
Upgrading, Migrating, and Converting Avaya Media Servers and Gateways,
03-300412.
To assign node names and IP addresses
1. At the SAT prompt, type change node-names ip to open the Node Names screen.
Example Node Names Screen
change node-names ip
Name
default_________
node-1-clan
node-2-clan
node-10-lsp
node-11-lsp
__________
__________
__________
2. Enter the name and IP address for the C-LANs and LSPs.
3. Press F3 (Enter) when complete.
212 Installing and Upgrading the Avaya G700 Media Gateway and Avaya S8300 Media Server
IP NODE NAMES
IP Address
0__.0__.0__.0__
__ 192.168.1 _.124
192.168.1 _.97_
192.168.1 _.50_
192.168.1 _.51_
___.___.___. _
___.___.___. _
___.___.___. _
Name
_______________ ___.___.___.___
_______________ ___.___.___.___
_______________ ___.___.___.___
_______________ ___.___.___.___
_______________ ___.___.___.___
_______________ ___.___.___.___
_______________ ___.___.___.___
_______________ ___.___.___.___
Page 1 of 1
IP Address