Avaya G700 Installing Manual page 664

Manual upgrade of an existing S8300A and G700 to R3.1
To re-enable alarm origination
1. Telnet to the S8300 and log on.
2. At the command prompt, type almenable -d b -s y
where
-d b sets the dialout option to both (numbers)
-s y enables SNMP alarm origination
3. Type almenable (without any options) to verify the alarm origination status.
To back up the system
Using the Maintenance Web Interface, back up the system as you did before the upgrade
selecting Save Translations and all backup sets.
To restart LSPs (if any)
To restart Communication Manager on LSPs (if any) after the upgrade:
1. Access the server's command line interface using an SSH client, like PuTTY, and an IP
address of 192.11.13.6.
2. At the command prompt, type start -ac and press Enter.
This completes the upgrade process for a G700 with an S8300.
664 Installing and Upgrading the Avaya G700 Media Gateway and Avaya S8300 Media Server