Issue 6
4 - 14
1.
Install the ETU in the KSU and connect the applicable cables.
When installing a VDH2(8)-U10 ETU, install the cable clamp
on the KSU frame as shown in
Clamp on the KSU
Figure 4-6 Mounting the Cable Clamp on the KSU Frame
2.
Attach the sponge (provided) to the inner surface of the
clamp lining and close the clamp over the cables as shown in
Figure 4-7 Attaching the Sponge to the
Figure 4-7 Attaching the Sponge to the Clamp
Figure 4-6 Mounting the Cable
Frame.
Clamp.
Electra Elite
Sponge
Installing KSUs