Table of Contents
Advertisement
Duplex printing (depending on model)
This function is only available if you have previously installed the duplex unit and the additional paper
tray at the back of your terminal.
After installing the duplex unit at the back of your multi-function terminal, you can print faxes received
in two ways:
• SINGLE SIDED
• DOUBLE SIDED
All faxes received are printed according to the mode selected from the menu, no matter how the duplex
key is set.
To select the fax print mode:
Select the required option SINGLE SIDED or DOUBLE SIDED and validate your choice with
the OK key.
Adjust to page
This option allows you to print out documents automatically adjusting them to the page format.
To turn adjust to page mode on:
Select the WITH option and confirm your choice using the OK key.
Selecting the reception PC
This menu lets you select a PC to which all the documents received by the terminal will be re-routed.
By means of the
validate by means of the OK key.
Adjusting the screen contrast
This adjustment only affects the screen contrast.
Adjust the contrast with the
As delivered your fax is preset by default. However, you may adjust it to meet your requirements by
resetting the technical parameters.
or
keys, select the PC that you want to designate as the receiver and
and
T
ECHNICAL PARAMETERS
3-8
244 OK - SETUP / RECEPTION / DUPLEX
245 OK - SETUP / RECEPTION / ADJUST PAGE
246 OK - SETUP / RECEPTION / PC RECEPT.
271 OK - SETUP / SCREEN / LCD CONTRAST
keys then validate your selection with the OK key.
Setting your machine
Advertisement
Table of Contents
