Sntp Server Configuration - Sagem 6890N User Manual

SNTP server configuration

The terminal can automatically update its date and time when connecting to an SNTP server.
Server address
Enter the name of the SNTP server, then validate with OK.
This name can be in the form of an IP address, a DNS address or a NetBIOS name.
Server port
Enter the server port number, then validate with OK.
The port by default is port 123.
Activating the server access
To activate the SNTP server, select WITH in the drop-down menu then validate with OK.
Time zone
Select the time zone where the terminal is located from the drop-down list then validate with OK.
If you have activated the automatic summer time management (menu 212), the TIME ZONE setting is
initialised automatically.
Summer time
Select the appropriate time setting in the drop-down list: winter time, summer time +1 or
summer time +2, then validate with OK.
This menu is not displayed if the menu 212 is activated.
Note:
PC de-registering
This menu lets you delete one or more PCs connected to the terminal via the LAN.
Select the PC that you want to delete from the list by means of the
validate with OK.
2551 OK - SETUP / NETWORKS / SNTP SERVER / ADDRESS
2552 OK - SETUP / NETWORKS / SNTP SERVER /PORT
2553 OK - SETUP / NETWORKS / SNTP SERVER / ACTIVATION
2554 OK - SETUP / NETWORKS / SNTP SERVER / TIME ZONE
2555 OK - SETUP / NETWORKS / SNTP SERVER / SUMMER TIME
256 OK - SETUP / NETWORKS / DE-REG. PC
3-14
Setting your machine
and arrows, then