Scanner Settings - Sagem 6890N User Manual

Operation

Scanner settings

The
resolution:
The
resolution:
the
The
original and the zoom value to apply to the document, 25 to 400%. Enter the zoom value
required using the keys of the digital key pad. Validate the choice with the OK key.
The ASSEMBLED parameter is used to define the choice of your printer outputs; either
assembled or not assembled. Validate the choice with the OK key.
If you wish, you can change the origin of the scanner.
By entering new values of X and Y given in mm (X < 210 and Y < 286), you will move
the scanning zone as shown on the figure below.
Select the X and Y coordinates with
Set the required coordinates with the numeric keypad or
by pressing key OK.
The
using keys
841 OK - ADVANCED FCT / COPY / B&W RESOLUTION
B&W RESOLUTION
setting to adjust the resolution for photocopying. Select the
ULTRA FAST
, keys, validate your choice by pressing the OK key.
or
842 OK - ADVANCED FCT / COPY / COLOUR RESOL.
COLOUR RESOL
. setting to adjust the resolution for photocopying. Select the
DRAFT TEXT
,
keys, validate your choice by pressing the OK key.
or
ZOOM
setting is used to reduce or enlarge part of the document by choosing the
y
x
CONTRAST
parameter is used to select the photocopy contrast. Adjust the contrast
, then validate the choice with the OK key.
and
5-17
, FAST QUALITY
,
, TEXT/PHOTO
843 OK - ADVANCED FCT / COPY / ZOOMING
844 OK - ADVANCED FCT / COPY / ASSEMBLED
845 OK - ADVANCED FCT / COPY / ORIGIN
or keys.
846 OK - ADVANCED FCT / COPY / CONTRAST
PHOTO
or by means of the
PHOTO
or by means of
Scanned area
or . Confirm your setting