Table of Contents
Advertisement
Setting your machine
You may enter the time you wish to transmit the document next to the current time and
press OK.
If you wish to modify the document feed type, select one of the options
MEMORY
If you wish, you may enter the number of pages of your documents before transmitting.
Activate relay by pressing key
The document in the feeder will be relayed either immediately or at a later time (according to your
choice) to the remote fax which will relay the document.
Fax or PC reception (depending on model)
This menu, combined with a software program installed on your PC (supplied or on option
depending on model) will enable you to select the machine you wish to receive the documents on:
• fax.
• PC.
• PC if available, fax otherwise.
For more details, please refer to the instruction manual provided with the software kit.
As delivered your fax is preset by default. However, you may adjust it to meet your requirements
by resetting the technical parameters.
To set the technical parameters:
Select the desired parameter and confirm with OK.
With the keys
press OK.
Parameter
1 - SCANNING
MODE
2 - TX HEADER
, then press OK.
T
ECHNICAL PARAMETERS
or
, modify the parameter settings by following the table below and
Setting
1 - NORMAL
Default value of the scan mode resolution for the documents
2 - FINE
to be transmitted.
3 - SFINE
4 - PHOTO
1 - WITH
If this parameter is on, your header will appear on all
2 - WITHOUT
documents sent to your subscribers with your name, number,
date and number of pages.
3-7
.
M 243 OK - SETUP / RECEPTION / PC RECEPT.
M 29 OK - SETUP / TECHNICALS
Signification
or
FEEDER
Advertisement
Table of Contents
