Incidents; Communication Errors - Sagem 6890N User Manual

Maintenance
Caution -
The fusing unit can become very hot during operation. To avoid injury - do not touch.
Wait for at least 10 minutes after the printer has been turned off and make sure that the fusing unit
has cooled before cleaning the interior of the printer.
For guaranteed performance of your terminal, some maintenance work (replacing the fusing unit
and the transfer roll) has to be done on the printer approximatly every 200,000 printed pages.
Please contact your supplier for this operation.
You can perform this operation when the quality of photocopied documents is no longer
satisfactory.
Confirm your choice by pressing the OK key.
I
NCIDENTS
If the communication fails, the fax advises you of an automatic retry later.
Example of what is displayed:
Current time - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
Time of next try - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
Transmission from the feeder
You have the choice between:
• waiting until the transmission takes place at the given time
Use a soft cloth to clean the printer. Never use abrasive or corrosive detergents.
S
ERVICING
S
CANNER CALIBRATION
C
OMMUNICATION ERRORS
6-17
80 OK - ADVANCED FCT / CALIBRATION
FRI 11 SEP 20:13
0142685014 20:18