Access To Functions - Sagem 6890N User Manual

Communications terminal

Table of Contents

Getting started

Key

ENTER

This section explains how to use the menu selection system. The [MENU] key on the operator

console allows you to use the menu to configure or adapt the printer environment, making settings

such as the number of copies to be made, the emulation, etc. depending on your own specific

needs. You can make these settings when the printer screen shows Ready.

Note:

The printer applies the most recent settings sent from the application software or from the printer driver, and

these always take priority over any settings made from the operator console.

To navigate vertically within the functions, use the

repeatedly pressing one of the keys).

To navigate horizontally within the functions, use the > and < keys. To change or confirm the

configuration of a component, press the [ENTER] key.

• The

key lets you access the system menu in order to modify the

configuration and the printing environment of the printer.

• When you press this key when selecting a menu, the latter is abando-

ned and the printer returns to normal operation.

Used to access a section or to enter numerical values. The > and < keys are

used to access or exit a subsection in some of the control procedures.

Used to access a section or to enter numerical values. The > and < keys are

used to access or exit a subsection in some of the control procedures.

Used in the same way as the < key in the mode selection function.

• Used in the same way as the > key in the mode selection function.

• Displays on-line help messages on the screen when there is a paper

jam:

If you press this key when the printer is Ready: it displays explana-

tions about the on-line help messages.

If you press this key when the on-line help is displayed: the on-line

help is cancelled.

This key lets you perform the following operations:

• Finalise the setup of numerical values and other selections.

• Define the paper source when the message Tray Selection ? is

displayed on the screen.

CCESS TO FUNCTIONS

2-11

Function

and

keys (access the menu shown by

Table of Contents