Modifying The Features Of A Mbx; Printing The Contents Of A Mbx; Deleting A Mbx; Printing The Mbx List - Sagem 6890N User Manual

Operation
The MBX is initialised. If you wish to initialise another, press C and repeat the same procedure.
To exit the

Modifying the features of a MBX

Select a free MBX out of the 31 MBX, or enter the number of a free MBX directly (1-31)
then confirm your choice with OK.
Enter the code of this MBX, if there is one, and confirm with OK.
Select the menu
Perform data modification of the menu and confirm with OK.
If needed, repeat the last two steps for the other menu.

Printing the contents of a MBX

Select a free MBX out of the 31 MBX, or enter the number of a free MBX directly (1-31)
then confirm your choice with OK.
Enter the code of the MBX, if there is one, and confirm with OK.
All documents found in the MBX are printed and the MBX is emptied.

Deleting a MBX

Before deleting an MBX, you need to make sure it is empty, by printing its content.
Select a free MBX out of the 31 MBX, or enter the number of a free MBX directly (1-31)
then confirm your choice with OK.
Enter the code of the MBX, if there is one, and confirm with OK.
Confirm MBX deletion, by pressing OK key.
The MBX is deleted and will appear as a free MBX in the list.

Printing the MBX list

The list gives the status of each MBX.
MBX
.
, press key
MAILBOX CODE
or
5-35
71 OK - MAILBOXES / CREATE MBX
, then confirm your choice with OK.
MAILBOX NAME
73 OK - MAILBOXES / PRINT MBX
74 OK - MAILBOXES / DELETE MBX
75 OK - MAILBOXES / PRT MBX LIST