Sending An Sms - Sagem 6890N User Manual

Communications terminal
Table of Contents

Advertisement

Terminal address
Enter the terminal number, then validate with OK key.
S
To send an SMS to any SMS-compatible devices:
Press the
key.
Write your SMS by means of the Qwerty keypad.
To do so, you have a true editor at your disposal:
• For the upper case letters, use the
• To move inside the data entry field, use the
• To move in the text from one word to another, press the CTRL key and one of the navigator keys,
• To go to the next line, use the
• To delete a character (by moving the cursor to the left), use the
Press the
key to confirm your entry.
Dial the number of the recipient (mobile phone or any other SMS-compatible device) in one of the
following ways:
• Dial the number by means of the numerical keypad,
• Enter the first letters of the recipient name,
• Press the
key until the required name appears (names are classified in alphabetical order).
• Press the
key to send the SMS.
Your SMS may be sent to only one person or to several people. To send an SMS:
• To only one person, press the
• To several people:
- Press the
key and enter the next person's name,
- Repeat the operations as many times as required (10 persons max.). Press the
SENDING SMS
confirm,
• If SMS appears, then the SMS has been put on hold and a further attempt will take place a couple
of minutes later. To immediately execute or cancel transmission, please see the paragraph Trans-
mission waiting queue, on page 5-11.
• To check the SMS has been sent properly, you may print the transmission/reception log
52 OK - PRINT/LOGS, p. 2-7).
(
454 OK - SMS SERVICE / PARAMETERS / TERM. ADDR.
SMS
ENDING AN
,
key,
key to confirm.
is displayed as the SMS is being sent.
3-26
or
keys,
or C key.
Setting your machine
key to

Advertisement

Table of Contents
loading

Table of Contents