Packing And Transporting The Unit - Sagem 6890N User Manual

Maintenance
P
ACKING AND TRANSPORTING THE UNIT
If you wish to transport the unit, always use the original packaging. If you do not pack the unit
correctly, you could void the warranty.
Scanner unit
Set the mains switch of the machine to OFF.
Disconnect the mains lead from the wall socket, then disconnect all the cables connected
to the machine.
Remove all the receptacles from the machine. The printer, the duplex unit (depending on
the model or option), the additional paper trays are all to be packed separately in their
respective packing boxes.
Package the receptacles in their original plastic packaging and cardboard boxes, put the
original plastic packaging on the machine and place it in its original box with its
components (receptacles, documentation, etc.).
Put all the documentation (manual and printed documents) in the box and close the box with
adhesive tape.
Printer unit
Make sure your terminal is fully switched off (switch set to 0). Disconnect the terminal
from the network and from the mains socket.
Package the printer in the following manner:
- Remove all the toner cartridges and the waste toner box from the
printer. Put the toner cartridges in the plastic bag supplied for the
purpose, to avoid any toner being spilled. Make sure the waste toner
box is fully closed.
- Put the developers protective packing piece (1) in place.
6-39