Paper Tray; Default Tray For Local Copy - Sagem MF 5680N User Manual

Then, once the document has been scanned:
TURN OVER DOC
THEN OK
Lift the flatbed scanner flap, turn over your card then close the flap
The following will be displayed:
COPY IN PROGRESS
Your fax machine will then print your card

Default tray for local copy

With same paper format in both trays
In this case, all selections made for this parameter will determine the default tray in the local copy slip.
The tray can however be changed on a case by case basis in the slip.
With different paper formats in the trays
If the default setting is AUTOMATIC, the default tray in the local copy slip will be the one currently
selected (depending on last printout): UPPER or LOWER.
If the default setting is UPPER or LOWER, this will be the option proposed in the local copy slip.
The tray can however be changed on a case by case basis in the slip.
The table below summarizes the effects of the "default tray" parameter values on the local copy.
2 trays with same paper
format
2 trays with different paper
formats
P
APER TRAY
Default tray
parameter
AUTO
UPPER
LOWER
AUTO
UPPER
LOWER
5-22
Operation
Default tray in local copy
slip
AUTO
UPPER
LOWER
tray selected last
UPPER
LOWER