Netbios Names - Sagem MF 5680N User Manual

Setting your machine
IP address
Enter the IP address of your terminal and press OK to confirm.
Sub-network mask
Enter the sub-network mask of your terminal and press OK to confirm.
Gateway address
Enter the IP address of the network gateway and press OK to confirm.
IEEE address (or Ethernet address) or MAC address
The Ethernet card of your terminal already has an unmodifiable, yet consultable, IEEE address.

Netbios names

These names, which can be used with the network options, are used to identify your terminal
machine from a PC connected to a local network (for instance with the name
"IMP-NETWORK-1").
Enter the selected name (15 characters max) and press OK to confirm.
The WINS1 and WINS2 servers, used with the network options, allow access to terminals on
other sub-networks by means of their NetBIOS name.
These two addresses must be filled in for the Scan To Disk function.
Enter the IP address of each server, then validate with OK.
SNTP server configuration (depending on model)
The terminal can automatically update its date and time when connecting to an SNTP server.
Server address
Enter the name of the SNTP server, then validate with OK.
This name can be in the form of an IP address, a DNS address or a NetBIOS name.
2532 OK - SETUP / NETWORKS / LOCAL NETWORK / IP ADRESS
2533 OK - SETUP / NETWORKS / LOCAL NETWORK / SUBNET MASK.
2534 OK - SETUP / NETWORKS / LOCAL NETWORK / GATEWAY
2535 OK - SETUP / NETWORKS / LOCAL NETWORK / IEEE ADRESS
2536 OK - SETUP / NETWORKS / LOCAL NETWORK / NETBIOS 1
2537 OK - SETUP / NETWORKS / LOCAL NETWORK / NETBIOS 2
2538 OK - SETUP / NETWORKS / LOCAL NETWORK / WINS SRV. 1
2539 OK - SETUP / NETWORKS / LOCAL NETWORK / WINS SRV. 2
2551 OK - SETUP / NETWORKS / SNTP SERVER / ADDRESS
3-13