Paper; Setting Keyboard Lock Print.cartr - Sagem MF 3260 User Manual

Chapter 1. Installation
11 It may take a moment to update the cartridge. When
the process is completed, the following appears on
the display:
action completed / remove card
12 Pull the Plug'n'Print card out of the fax machine.
You can interrupt the recharging process at any time by
simply pressing STOP. However, the toner level memo-
ry must be updated for each new toner cartridge. If you
have pressed the STOP key by mistake, you can restart
the recharging process as follows:
1 Press MENU/OK,
62
new black
2 Select with
yes
OK. Select with
¾
machine will ask you to insert the Plug'n'Print card.
If the toner level of your cartridge is low, then every time
you open and close the cover, the following question will
black=new?
appear on the display:
installed a new cartridge, press STOP. If you have in-
stalled a new cartridge, press OK and follow the descrip-
tion set forth above.
Displaying the Toner Level
Whenever you insert a new toner cartridge,
Æ
you must update the toner level memory of
your fax machine with the Plug'n'Print card that is
included with the new cartridge. Your fax machine
registers the extent of toner usage for every print-
out and calculates the toner level of the cartridge
based on this. Th e indicated toner level is only
meaningful if you update each new toner cartridge
with the Plug'n'Print card provided.
1 Press MENU/OK,
62
cart capacity
2 Select
with OK. Th e toner level of the toner cartridge is
indicated by a percentile value between 100 percent
(full) and 0 percent (empty).
and OK
, and confi rm with
¾
. After a short time, the fax
If you have not
and OK.
with and confi rm
¾
Pressing C will return you to the previous menu step;
3
pressing STOP will return you to the root menu.

Paper

Before your fax machine will be ready to make copies or
receive faxes, you must load paper into the machine. Use
the following paper size: A4, 210 × 297 millimetres. Your
fax machine works with normal copier paper and with
typewriter paper (60 to 90 g/m
Loading Paper
1 Pull out the paper tray.
2 Separate the paper sheets by fanning them out,
then align them by tapping edge of the stack lightly
against a fl at surface. Th is will prevent several sheets
of paper from being drawn in all at once.
3 Remove the cover from the paper tray. Put in only as
much paper as will fi t under the raised limit mark-
ers on the upper edge of the paper tray (see also the
drawings on the cover of the paper tray). You can
load up to 250 sheets into the paper tray.
1. Installation 1. Installation
2
).
11