Table of Contents
Advertisement
Language
This setting enables you to choose a language other than that imposed by the COUNTRY setting.
To select the language:
Select the required option and press the OK key to confirm.
Local prefix
This function is used when your fax is installed with a private network, behind a company's PABX. It
allows you to program an additional automatic local prefix (to be defined), enabling you to
automatically exit the company's telephone network system, but only under certain conditions:
• the company's internal numbers, where a prefix is not required, must be short numbers less than
the minimal size (to be defined, for example France has 10 digits),
• the outside numbers requiring a prefix, must be long numbers greater or equal to the minimal size
(to be defined, for example France has 10 digits).
Programming your fax with the local prefix consists of two steps:
• defining the minimal size (or equal) of the company's outside numbers,
• defining the outgoing local prefix of the company's telephone network. This prefix will automati-
cally be added as soon as an external number is dialled.
Caution -
If you define a local prefix, do not add it to the numbers stored in the directory, it
will be automatically dialled with each number.
Prefix
Defining the minimal size
You can change the default value for the minimal size of the company's outside numbers and
validate with OK. The minimal size will range between 1 and 30.
Defining the local prefix
Enter the outgoing local prefix of the company's telephone network (maximum 5 characters) and
validate with OK.
203 OK - SETUP / GEOGRAPHICAL / LANGUAGE
252 OK - SETUP / NETWORKS / PREFIX
2521 OK - SETUP / NETWORKS / PREFIX / SIZE NUMBER
2522 OK - SETUP / NETWORKS / PREFIX / PREFIX SETTING
3-4
Setting your machine
Advertisement
Table of Contents
