Operation
Example:
The charge code will always be hidden.
The maximum length that can be entered is 30 characters. When dialing, only the digits are sent
on the line. The "+" symbol inserted is not sent. In the example above, the number
97380884440123
If your equipment is connected to a private exchange (PABX), enter the prefix (number used by
your PABX to access the telephone network, for example 0), followed by a "/" (or pause).
When a charge code is used, the transmission reports and the machine log printout contains the
correspondent's number followed by the charge code's "+" symbol.
USB
MEMORY KEY
You can connect a USB memory Key on the front side of your terminal. The files stored in TXT,
TIFF and JPEG formats will be analyzed and you will be able to realize the following actions:
• print the stored files contained in your USB memory key,
• delete the files contained in your USB memory key,
• run an analysis on the contents of the inserted USB memory key,
• digitize a document on your USB memory key.
TO:
9738088444+****
is dialed.
5-35