Table of Contents
Advertisement
Remark:
Since the addressee's number is generally on the document to be transmitted, you may also dial before positioning the
document.
From the flat scanner
C
HOOSING THE RESOLUTION
Resolution
You have 4 modes for document transmission.
The mode choice depends on the type of document to be transmitted:
• Normal mode, to be used for good quality documents, without drawings or small details.
• Fine mode, symbolised by Fine at the bottom of the display screen. To be used for documents
with drawings or small characters.
• Super Fine mode, symbolised by SFine at the bottom of the display screen. To be used for docu-
ments with very fine or small character drawings.
• Photo mode symbolised by Photo at the bottom of the display screen. To be used for photogra-
phic documents.
To select the resolution mode:
Press
shows the current mode.
Contrast
You can set the contrast if your document is too light or too dark. If the document is light, you must
raise the contrast and if it is dark, you must reduce it.
To set the contrast:
Press
a cursor.
Scanner origin
key as many times as necessary to select the required mode. A
as many times as necessary to choose the desired contrast, as shown by the position of
5-2
Using the handle, lift up the document
feeder tray.
Put your document, with the printed face
down on the scanner window. The
scanner origin is located at your end, to
the left, as shown opposite.
Once the operation is complete, lift the
document feeder tray and recover your
document.
/
CONTRAST
Operation
icon on the screen
Advertisement
Table of Contents
