Pro-Form CrossXover User Manual page 9

11, Attach the Leg Lever Bracket (14) to the Seat
Base (2) with two M8 x 40mm Button Screws
(142) and two M8 Split Washers (140),
12, Grease an MIO x 75mm Button BoUt(129), Attach
the Leg Lever (4) to the Leg Lever Bracket (14)
with the BoUtand an MIO NyUonLocknut (81), Do
not overtighten the Locknut; the Leg Lever
must be able to pivot easily.
13, Attach the Right PedaU(28) to the Right PedaU
Leg (8) with two M8 x 51mm Button Screws (98),
two M8 Split Washers (140), and two M8
Washers (139),
Repeat this step with the Left Pedal (27} and
the Left PedaJ Leg (7}.
14, SHde a Hastic Spacer (180) onto the right Crank
Shaft (68), Orient the Right PedaU Leg (8) as
shown, Attach the Right PedaU Leg to the Crank
Shaft with an M8 x 19mm Button Screw (94) and
an M8 Large Zinc Washer (74),
Repeat this step with the Left Pedal Leg (7}.
11
12
13
14
14
142
14O
140 98
4O
9