Table of Contents
Advertisement
SiS Onboard LAN Driver Installation
SiS Onboard LAN Driver Installation
Installing the SiS Onboard LAN Drivers under Windows
NT4.0
1.
Double click the Network icon in the Control Panel.
2.
Select "Wired to the Network" and click "Next..."
3.
Click "Select from list".
4.
Select Have Disk. Insert the "SiS PCI Fast Ethernet Adapter Drivers
Disk" in your CD drive and specify the correct path.
5.
The Lan Driver For NT4.0 Path is in SOYO CD:\lan\sis\nt40.
6.
Select one of the following models:
7.
"SiS 900 PCI Fast Ethernet Adapter" then click OK.
8.
In the dialog box that appears, select the Media Type and enter the
Network address for the adapter if necessary (You can click Help for
more detailed information about these settings).
9.
Click OK to complete this dialog box (or Cancel to terminate the
configuration without completing it).
10. Exit the Network control panel window. Windows NT asks if you wish
to reboot. You must reboot before the adapter will function properly.
SY-P4-645DX DRAGON Ultra
Chapter 5
83
Advertisement
Table of Contents
