Soyo Combo Setup - SOYO SY-P4-645DX DRAGON Ultra User Manual

BIOS Setup Utility

3-1 SOYO COMBO SETUP

This motherboard does not use any hardware jumpers to set the CPU
frequency. Instead, CPU settings are software configurable with the BIOS
[SOYO COMBO SETUP].
After the hardware installation is complete, turn the power switch on, then
press the <DEL> key during the system diagnostic checks to enter the
Award BIOS Setup program. The CMOS SETUP UTILITY will display on
screen. Then, select the [SOYO COMBO SETUP] option from the main
menu and press the <Enter> key.
System Performance
System Freq. (CPU:DRAM)
CPU Frequency Select
DRAM Frequency Select
AGP Frequency Select
Ratio select
x CPU Clock Ratio
CPU Voltage Select
DDR (2.5V) Voltage Select
AGP (1.5V) Voltage Select
Advanced DRAM Control
C.I.H. 4-WAY Protection
Onboard 6Ch H/W Audio
Onboard IDE RAID
Onboard (10/100) Lan
Onboard Lan MAC Address Input
Quick Power On Self Test
First Boot Device
Second Boot Device
Third Boot Device
Boot Other Device
RAID/ATA & SCSI Boot Order
Move Enter:Select
F5:Previous Values
The [SOYO COMBO SETUP] menu combines the main parameters that
Phoenix – Award BIOS CMOS Setup Utility
SOYO COMBO Feature
Normal
100:100
100
100 x 2MHz
Lock in 66MHz
Auto
8 X
Default
Default
Default
Press Enter
Disabled
Enabled
Enabled
Disabled
Press Enter
Enabled
Floppy
HDD-0
LS120
Enabled
RAID/ATA, SCSI
+/-/PU/PD:Value
F6:Fail-Safe Defaults
SY-P4-645DX DRAGON Ultra
Menu Level
F10:Save ESC:Exit
38
Item Help
F1:General Help
F7: Optimized Defaults