Table of Contents
Advertisement
Once you click a disk in the Available Disks list box or the Pool list
box, the device information for that disk appears, including Model
Number, Location, Capacity and Mode. It will help you to determine
which disks will be added/removed to/from the spare pool.
You may also refer to the brief help information at the bottom of the
Spare Pool Management window.
Note:
1. When a disk is added/removed to/from the spare pool, the
software will ask you to reboot the system, you can reboot at
once or later.
2. When there is no RAID 1 or RAID 0/1 array, if you want to add
a disk to spare pool, the spare disk will not take effect when the
array is broken.
104
Advertisement
Table of Contents
