SOYO SY-P4-645DX DRAGON Ultra User Manual page 67

Mpga socket 478 processors supported agp/pci motherboard 400/533 mhz front side bus supported atx form factor
Table of Contents

Advertisement

BIOS Setup Utility
Power Management Controls
Setting
ACPI Suspend
S1(POS)
Type
S3(STR)
S1 & S3
V/H Sync+Blank
Video Off
Method
Blank screen
DPMS Support
MODEM Use
Auto
IRQ
3, 4, 5, 7, 9, 10, 11
Power off
Hot Key
Function As
Disabled
Suspend
Disabled
HDD Off After
Power Failure 1 Min ~ 15 Min
PWPON After
Off
PWR-Fail
On
Former-Sts
SY-P4-645DX DRAGON Ultra
Description
Set the standby mode under
window OS to S1 or S3.
S1-System standby.
S3-Suspend to RAM.
Selects the method by which
the monitor is blanked.
Assigns an IRQ# to the
modem device.
Select hot key function to
Power off or suspend.
Lets you define the system
power down times.
The system will remain off
when power comes back
after a power failure.
The system will switch on
when power comes back
after a power failure.
The system will return to the
state it was in before the
power failure when power
returns. (i.e: If the system
was on, it will switch on
again, if it was off, it will
remain off).
63
Note
Default
Default
Default
Default
Default
Default

Advertisement

Table of Contents
loading

Table of Contents