SOYO SY-P4-645DX DRAGON Ultra User Manual page 90

Highpoint HPT372 Driver Installation
Installing RAID Driver on an Existing System
Windows 9x/ME Installation
If Windows can not find new hardware, the driver can be installed
through the following steps:
1. Shut down all programs.
2. Click Start-->Setup-->Control
Add New Hardware
Next
3. Click
4. A dialog box will appear and ask whether to let windows
search new hardware. Select
hardware from a
5. Hardware's of different types will be shown in the follow-on
window. Select
continue.
6. Insert the floppy disk of driver into the floppy drive, then click
Have Disk....
7. A dialog box will pop up, input the path of driver
CD:\Raid\Hpt372\Win98_ME.Then click
8. In the follow-on window, driver will list out the controller type
you need to install, please just click
9. Follow the system prompt to install driver. When finished,
restart the computer.
Windows NT 4.0
1. Click Start-->Setup-->Control
SCSI Adapter
2. In the follow-on window, select
button.
3. In the follow-on window, select
4. Insert the Soyo cd
D:\Raid\Hot372\WinNT, then click
5. In the follow-on window, select
icon.
in the popup window to continue.
list, and then click
SCSI Controllers
icon.
of driver, input the path of driver
86
SY-P4-645DX DRAGON Ultra
Panel, then double-click on
No, I want to select the
Next to continue.
and then click
OK to continue.
Next to continue.
Panel, then double-click
Driver item, then click
Have Disk....
OK.
HPT370/HPT372 UDMA/ATA
Next to
SOYO
Add