Table of Contents
Advertisement
STEP 3.In 'Setting' dialog, check 'Enable SPDIF-OUT', input
the playback delay time, and select 5 Vp-p (Optical).
Please note that in playback, if there is no lapse
longer than three seconds between each track, the
MD player cannot recognize the tracks and will
record all of them into one. It is recommended that
you set the lapse time to 3~5 seconds to meet all
type of MD player requirements.
STEP 4.Start to play the songs. You will see that the MD
player starts to do the recording as well.
Recording From SPDIF-In
The optical module can be connected to SPDIF-IN device, such
as the portable CD-ROM player, the CD-ROM drive, the MD
Player, to name a few. The Windows application and the
MP3/Wave player can be used to do the recording of the signal
from SPDIF-IN. The recording steps are as follows:
STEP 1.Use optical fiber or coaxial to connect the sound
card and SPDIF-IN device.
159
Advertisement
Table of Contents
