Table of Contents
Advertisement
1.
Select
confirm.
2.
Select the disk mode to be set in the popup selection box and
press
Enter
VII. Set Boot Disk.
The following steps shall be taken to set the boot disk:
1.
In the menu, select
confirm.
2.
In the validated channel status zone, use the arrow key to
select the boot device and press
Note:
1.
The
Set Boot Disk
disk is connected to IDE on motherboard.
2.
After the boot disk is set, its status will become Boot.
Highpoint ATA RAID Management Software
Install Software
Insert SOYO driver utility CD, Highlight the driver HighPoint Utility
for Win 9x/ME/2000/NT/XP and click ok.
To manually install the RAID Administrator, insert the SOYO driver
6. Set Disk Mode
to confirm.
7. Set Boot Disk
item appears on condition that no hard
in the menu and press
item, press
Enter
to confirm.
97
Enter
to
Enter
to
Advertisement
Table of Contents
