Amg1001-T/Amg1011-T Access And Login - ZyXEL Communications AMG1001-T Series User Manual

25.2 AMG1001-T/AMG1011-T Access and Login

I forgot the IP address for the AMG1001-T/AMG1011-T.
The default IP address is 192.168.1.1.
1
If you changed the IP address and have forgotten it, you might get the IP address of the AMG1001-
2
T/AMG1011-T by looking up the IP address of the default gateway for your computer. To do this in
most Windows computers, click Start > Run, enter cmd, and then enter ipconfig. The IP address
of the Default Gateway might be the IP address of the AMG1001-T/AMG1011-T (it depends on the
network), so enter this IP address in your Internet browser.
If this does not work, you have to reset the device to its factory defaults. See
3
15.
I forgot the password.
The default password is 1234.
1
If this does not work, you have to reset the device to its factory defaults. See
2
15.
I cannot see or access the Login screen in the web configurator.
Make sure you are using the correct IP address.
1
• The default IP address is 192.168.1.1.
• If you changed the IP address
• If you changed the IP address and have forgotten it, see the troubleshooting suggestions for
forgot the IP address for the AMG1001-T/AMG1011-T.
Check the hardware connections, and make sure the LEDs are behaving as expected. See the Quick
2
Start Guide.
Make sure your Internet browser does not block pop-up windows and has JavaScripts and Java
3
enabled. See
If there is a DHCP server on your network, make sure your computer is using a dynamic IP address.
4
See Appendix A on page
• If there is no DHCP server on your network, make sure your computer's IP address is in the
same subnet as the AMG1001-T/AMG1011-T. See
Reset the device to its factory defaults, and try to access the AMG1001-T/AMG1011-T with the
5
default IP address. See
AMG1001-T/AMG1011-T Series User's Guide
(Section 8.2 on page
Appendix C on page 164.
126. Your AMG1001-T/AMG1011-T is a DHCP server by default.
Section 1.6 on page
54), use the new IP address.
Appendix A on page
15.
Chapter 25 Troubleshooting
Section 1.6 on page
Section 1.6 on page
I
126.
123