Supported Mibs; The Snmp Screen - ZyXEL Communications AMG1001-T Series User Manual

SNMP itself is a simple request/response protocol based on the manager/agent model. The
manager issues a request and the agent returns responses using the following protocol operations:
• Get - Allows the manager to retrieve an object variable from the agent.
• Set - Allows the manager to set values for object variables within an agent.

16.1.1 Supported MIBs

The AMG1001-T/AMG1011-T supports MIB II, which is defined in RFC-1213 and RFC-1215. The
focus of the MIBs is to let administrators collect statistical data and monitor status and
performance.

16.2 The SNMP Screen

Use this screen to change your AMG1001-T/AMG1011-T's SNMP settings. Click Access
Management > SNMP to display the following screen.
Figure 51 Access Management > SNMP
The following table describes the labels in this screen.
Table 37 Access Management > SNMP
LABEL
Get Community
Set Community
SAVE
AMG1001-T/AMG1011-T Series User's Guide
DESCRIPTION
Enter the Get Community, which is the password for the incoming Get and GetNext
requests from the management station. The default is public and allows all requests.
Enter the Set community, which is the password for incoming Set requests from the
management station. The default is public and allows all requests.
Click this to save your changes.
Chapter 16 SNMP
93