The Dhcp Ip Pool Summary Screen - ZyXEL Communications AMG1001-T Series User Manual

Chapter 8 LAN Setup
Table 17 Interface Setup > LAN
LABEL
Starting IP Address
Current Pool
Summary
IP Pool Count
Lease Time
DNS
DNS Relay
Primary DNS
Server
Secondary DNS
Server
DHCP Server IP for
Relay Agent
SAVE
CANCEL

8.2.1 The DHCP IP Pool Summary Screen

This table allows you to see the IP and Media Access Control (MAC) addresses of individual
computers on your LAN. In the Interface Setup > LAN screen, click the Current Pool Summary
button to open the following screen.
Figure 29 Interface Setup > LAN > DHCP IP Pool Summary
56
DESCRIPTION
This field specifies the first of the contiguous addresses in the IP address pool.
Click this to display a summary table for the IP address pool. See
56 for more details.
The AMG1001-T/AMG1011-T is pre-configured with a pool of IP addresses for the DHCP
clients (DHCP Pool). See the product specifications in the appendices. Do not assign
static IP addresses from the DHCP pool to your LAN computers.
This field specifies the size, or count of the IP address pool.
This is the period of time DHCP-assigned addresses is used.
DHCP automatically assigns IP addresses to clients when they log in. DHCP centralizes
IP address management on central computers that run the DHCP server program. DHCP
leases addresses, for a period of time, which means that past addresses are "recycled"
and made available for future reassignment to other systems.
Select Auto Discovered DNS Server Only if your ISP dynamically assigns DNS server
information (and the AMG1001-T/AMG1011-T's WAN IP address).
Select User Discovered DNS Server Only if you have the IP address of a DNS server.
You have to specify the primary and secondary DNS servers in the following fields.
Enter the IP address for the primary DNS server.
Enter the IP address for the secondary DNS server.
This field is only available when you select Relay in the DNS Relay field. Enter the IP
address of the actual remote DHCP server in this field.
Click this to save your changes.
Click this to restore your previously saved settings.
Section 8.2.1 on page
AMG1001-T/AMG1011-T Series User's Guide