ZyXEL Communications AMG1001-T Series User Manual page 38

Chapter 6 Quick Start Wizard
The following table describes the fields in this screen.
Table 10 ISP Connection: Bridge Mode
LABEL
VPI
VCI
Connection
Type
BACK
NEXT
EXIT
Click NEXT to save your changes and complete the setup.
8
Figure 19 Complete Quick Start
Launch your web browser and navigate to www.zyxel.com. Internet access is just the beginning.
9
Refer to the rest of this guide for more detailed information on the complete range of AMG1001-T/
AMG1011-T features. If you cannot access the Internet, open the web configurator again to confirm
that the Internet settings you configured in the wizard setup are correct.
38
DESCRIPTION
Enter the VPI assigned to you. This field may already be configured. VPI defines a virtual
circuit. Refer to the appendix for more information.
Enter the VCI assigned to you. This field may already be configured. VCI defines a virtual
circuit. Refer to the appendix for more information.
Select the multiplexing method used by your ISP from the drop-down list box.
Available options are: 1483 Bridged IP LLC and 1483 Bridged IP VC-Mux.
Click this to return to the previous screen without saving.
Click this to continue to the next wizard screen.
Click this to close the wizard screen without saving.
AMG1001-T/AMG1011-T Series User's Guide