Troubleshooting; Chapter 25 Troubleshooting; Power, Hardware Connections, And Leds - ZyXEL Communications AMG1001-T Series User Manual

This chapter offers some suggestions to solve problems you might encounter. The potential
problems are divided into the following categories.
•

Power, Hardware Connections, and LEDs

• AMG1001-T/AMG1011-T Access and Login
• Internet Access
25.1 Power, Hardware Connections, and LEDs
The AMG1001-T/AMG1011-T does not turn on. None of the LEDs turn on.
Make sure the AMG1001-T/AMG1011-T is turned on.
1
Make sure you are using the power adaptor or cord included with the AMG1001-T/AMG1011-T.
2
Make sure the power adaptor or cord is connected to the AMG1001-T/AMG1011-T and plugged in to
3
an appropriate power source. Make sure the power source is turned on.
Turn the AMG1001-T/AMG1011-T off and on.
4
If the problem continues, contact the vendor.
5
One of the LEDs does not behave as expected.
Make sure you understand the normal behavior of the LED. See
1
Check the hardware connections. See the Quick Start Guide.
2
Inspect your cables for damage. Contact the vendor to replace any damaged cables.
3
Turn the AMG1001-T/AMG1011-T off and on.
4
If the problem continues, contact the vendor.
5
AMG1001-T/AMG1011-T Series User's Guide
C
HAPTER

Troubleshooting

Section 1.5 on page
2 5
13.
122