ZyXEL Communications AMG1001-T Series User Manual page 23

Table 2 Navigation Panel Summary
LINK
Quick Start
Quick Start
Interface Setup
Internet
LAN
Advanced Setup
Routing
NAT
QoS
ADSL
Firewall
Access Management
ACL
Filter
SNMP
UPnP
DDNS
CWMP
Maintenance
Administration
AMG1001-T/AMG1011-T Series User's Guide
TAB FUNCTION
Use this wizard to set up your Internet connection.
Internet Use this screen to configure ISP parameters, WAN IP address
assignment and other advanced properties.
PVC Summary Use this screen to display your PVC settings.
Table
LAN Use this screen to configure LAN TCP/IP and DHCP settings and
other advanced properties.
DHCP IP Pool Use this screen to display the IP and MAC addresses of the
Summary computers on your LAN.
Routing Table Use this screen to display the static routes on your AMG1001-T/
List AMG1011-T.
Static Route Use this screen to configure IP static routes to tell your device about
networks beyond the directly connected remote nodes.
NAT Use this screen to configure the NAT settings.
DMZ Use this screen to configure the DMZ settings.
Virtual Server Use this screen to forward incoming service requests to the server(s)
on your local network.
IP Address Use this screen to change your AMG1001-T/AMG1011-T's address
Mapping mapping settings.
QoS Use this screen to enable QoS and traffic prioritizing and configure
bandwidth management on the WAN.
QoS Settings Use this screen to check the QoS rules and actions you configured
Summary for the AMG1001-T/AMG1011-T.
Use this screen to configure the ADSL settings on your AMG1001-T/
AMG1011-T.
Use this screen to activate/deactivate the firewall and/or SPI on your
AMG1001-T/AMG1011-T.
Use this screen to determine which application can access which
AMG1001-T/AMG1011-T interface from which computers.
IP/MAC Filter Use this screen to create IP/MAC filter rules.
Application Filter Use this screen to set the days and times for your device to perform
content filtering.
URL Filter Use this screen to allow or deny traffic from certain types of
applications.
Use this screen to configure your AMG1001-T/AMG1011-T's settings
for Simple Network Management Protocol management.
Use this screen to turn UPnP on or off.
This screen allows you to use a static hostname alias for a dynamic
IP address.
Use this screen to have a management server manage the
AMG1001-T/AMG1011-T.
Use this screen to configure your device's password.
Chapter 2 Introducing the Web Configurator
23