WLAN Module
Description
WLAN module (802.11b/g/n)
The WLAN module is secured with one screw and has one connected antenna.
Figure 7-32
To remove the WLAN module:
1.
Prepare the computer for disassembly (see
on page
2.
Remove the rear cover (see
3.
Remove the system board cover (see
4.
Disconnect the antenna cable from the module (1).
5.
Remove the Phillips screw (2) that secures the module to the computer.
64
Chapter 7 Removal and Replacement Procedures All-in One (AIO) Chassis
WLAN module location
34).
Rear Cover on page
Preparing to Disassemble the Computer
35).
System Board Cover on page
Spare part number
634906-001
60).