Stand
Description
Stand
The stand is secured with four screws that you can remove from the inside of the rear cover.
To remove the stand:
1.
Prepare the computer for disassembly (see
on page
2.
Remove the rear cover (see
3.
From the inside of the rear cover, remove the four screws that secure the stand to the cover.
Figure 7-2
36
Chapter 7 Removal and Replacement Procedures All-in One (AIO) Chassis
34).
Rear Cover on page
Removing the stand screws
Preparing to Disassemble the Computer
35).
Spare part number
669988-001