Front Bezel - HP Pro 1005 Maintenance & Service Manual

To install the system board, reverse the removal procedures.

Front Bezel

Description
Front bezel–HP
Front bezel–CPQ
The front bezel is located on the front of the computer and is secured to the display panel bracket
with 6 screws. You can remove the bezel without removing most of the main computer components,
which the following procedure demonstrates.
To remove the front bezel while removing the minimal number of components:
1. Prepare the computer for disassembly (see
on page
2. Remove the rear cover (see
3. Remove the system board cover (see
4. Remove the side I/O cover (see
5. Remove the webcam (see
6. Remove the speakers (see
7. Remove the 6 screws that secure the bezel to the computer.
Figure 7-37
8. Lift the computer from the bezel.
To install the front bezel, reverse the removal procedures.
34).
Rear Cover on page
Webcam Module on page
Speakers on page
Removing the front bezel
Preparing to Disassemble the Computer
35).
System Board Cover on page
Side I/O Cover on page
58).
42).
Spare part number
669989-001
669990-001
60).
56).
Front Bezel 69