Wlan Module - HP EliteDesk 705 G3 Desktop Mini Maintenance And Service Manual

WLAN module

Description
512 GB, NVMe, 2280, TLC, M.2, PCIe
512 GB, NVMe, TLC, M.2
256 GB, NVMe, 2280, SS, M.2, PCIe-3x4
1. Prepare the computer for disassembly
2. Remove the access panel
3. Remove the hard drive
4. Remove the drive cage
5. Locate the WLAN module on the system board.
6. Disconnect both antenna cables from the WLAN module.
NOTE:
disconnect and connect the antenna cables.
7. Remove the screw (1) securing the WLAN module to the system board.
28 Chapter 4 Removal and replacement procedures – desktop mini (DM) chassis
(Access panel on page
(Hard drive on page
(Drive cage on page
You may need to use a small tool, such as a pair of tweezers or needle-nose pliers, to
(Preparation for disassembly on page
19).
23).
25).
18).