12
Fax Active Screen
Parameter
TX Display
RX Display
Initial setting
Description
Specify the default settings for Copy mode.
The copy settings selected when the machine is turned on (the pow-
er switch is set to "n") or the [Reset] key is pressed can be specified.
• Current Setting:
The settings specified from the touch panel before Utility mode
was entered are set as the default settings for Copy mode.
• Factory Default:
The factory default settings are set as the default settings for
Copy mode.
Reminder
To change the default settings for Scan mode or Fax mode, press the
[Scan] or [Fax] key, enter Utility mode, and then select a setting for this
parameter.
!
Detail
For details on the default settings and the factory default settings, refer
to "Automatically canceling the settings (automatic panel reset)" on
page 2-31.
12-28
Description
Specify settings for faxing. For details, refer to the Facsimile Opera-
tions of the user manual.
Utility
Default Setting
Factory Default
d-Color MF25