Application functions
8
Application functions
8.1
Inserting paper between overhead projector trans-
parencies ("OHP Interleave" function)
In order to prevent copies printed onto overhead projector transparencies
from sticking together as a result of the heat that is produced during copying,
paper (interleaf) can be inserted between the transparencies
!
Detail
For details on loading overhead projector transparencies, refer to "Paper
types and paper capacities" on page 7-4, "Loading paper into the bypass
tray" on page 2-56.
To copy using the "OHP Interleave" function
0 The Finishing setting cannot be changed.
0 The number of copies is set to "1" and cannot be changed.
1
Position the document to be copied.
–
For details on positioning the document, refer to "Feeding the doc-
ument" on page 3-9.
2
Load overhead projector transparencies into the bypass tray or the 1st
tray. Load the interleaf paper into the desired paper tray.
–
Use interleaf paper with the same size as the overhead projector
transparencies, and load them in the v orientation.
d-Color MF25
8
8-3